By Felix Schmidt, Application Engineer for Space

 

All spacecraft must contend with radiation. High-energy, stripped atomic nuclei and particles travelling almost at the speed of light bombard satellites and gradually damage the electronics on which they depend.

 

Typically, manufacturers use aluminium to protect their spacecraft. Aluminium is a strong, familiar material that does provide some protection. But it isn’t equally good at stopping every form of radiation and it’s relatively heavy: for every kilogram of aluminium added, more fuel is required, and that corresponds to a higher cost for the operator.

 

At FibreCoat, we’ve decided to approach this problem from a different direction. What if a radiation shield could bring together several materials, each chosen for a different job, into one lightweight composite?

 

Different particles, different materials

 

We tend to talk about radiation as if it were one thing. In fact, there are different kinds, and the mix of them changes as the spacecraft’s orbit does.

 

Electrons, protons and other particles interact with shielding differently: some particles stop; others pass through. Radiation can also produce secondary radiation inside a shield, posing another threat to electronics.

 

Materials with a high atomic number, such as bismuth, are effective at absorbing X-rays and gamma rays. Materials with a low atomic number, especially hydrogen-rich polymers, can help deal with other particles and some of the secondary radiation generated inside the shield.

 

Together, these materials can protect against different forms of radiation. The idea is known as *graded-Z shielding*, where ‘Z’ refers to an element’s atomic number. Rather than create the thickest barrier, we aim to put the right material in the right place so that it protects the spacecraft’s electronics against the right kind of radiation – and to do so while keeping the overall structure as light as possible.

 

How metal-coated fibres make it possible

 

We developed a process that involves coating each individual glass or basalt filament with a thin, continuous layer of metal. This combines a strong fibre core with the properties of a metal.

 

These materials can be turned into fabrics, arranged in layers and consolidated into composite plates. Engineers can change the metal, fibre content and layer sequence to suit different missions.

 

Our proposed radiation shielding material contains BisCoat, our bismuth-coated glass fibre, with a space-grade, high performance polymer, such as PEEK: the bismuth the supplies the high-Z component; the polymer provides a low-Z component and binds the fibres into a solid structure.

 

The simulations

 

We’ve been working with LOFITH Composites to manufacture our material. To test the concept, our team modelled radiation in a low-Earth orbit 500 kilometres above Earth, inclined at 30 degrees. SPENVIS described the trapped radiation; GEANT4 calculated the dose reaching a silicon detector behind each shield.

 

Rather than treating each composite as a single block, the model represented the individual coated filaments and the polymer between them in three dimensions. This was important: how the fibres are arranged affects how particles scatter and where secondary radiation shows up. This also lets us explore changes in fibre content, coating and layer structure.

 

We compared three options: solid aluminium; aluminium-coated fibres in a polymer composite; and bismuth-coated fibres in a similar composite. And we compared them at four equal mass-per-area values from 5 to 20 kilograms per square metre.

 

The result for trapped electrons was very encouraging. In the simulations, the bismuth composite achieved the same electron dose with 30 to 40 per cent less shielding mass per unit area than solid aluminium.

 

For trapped electrons, the material mattered, not just its mass.

 

What this means

 

It’s important to acknowledge that these same simulations did not establish an overall mass advantage for the total radiation dose in this orbit. Energetic trapped protons dominated the dose: they passed through the shields, leaving no clear difference in the total dose between the materials.

 

Good electron shielding does not guarantee good protection against every radiation hazard. The results instead point to environments where electrons are a larger part of the radiation problem, as in medium-Earth orbit, geostationary orbit and the outer radiation belt. Further testing is needed.

 

In these simulations, we also used a hydrogen-rich polyethylene model in place of PEEK. In later work will use the intended flight material and examine more complex arrangements of layers.

 

From idea to orbit

 

A simulation is one thing; space is another.

 

On 1 October 2026, the LofiCoat PicoSat mission launched on board SpaceX’s Transporter-18 flight. It carries two radiation sensors: one exposed to the surrounding environment; one placed behind a BisCoat shield. Their readings will test the new shield in situ. We expect to see results in the coming months. Next will come more detailed simulations, more precise proton calculations and designs for other orbits.

 

Our goal, ultimately, is to give spacecraft manufacturers more choice. Metal-coated fibres amount to a highly flexible way to combine strength, useful material properties and radiation protection in one structure. Our  first results are encouraging, showing that such fibres have a clear advantage over aluminium against trapped electrons. We’re now working to establish where that advantage can make the biggest difference in space.

 

5 October 2026, AACHEN—Advanced materials company FibreCoat has gone to space, with its fibre technology launched into orbit on 1 October aboard a SpaceX Falcon 9 rocket in a major milestone for the company and its technology.

 

The launch was the outcome of a partnership between FibreCoat and Spanish materials company Lofith Composites to develop next-generation thermoplastic composites for space. It marks FibreCoat’s transition from developing and validating its technology on Earth to demonstrating it in orbit.

 

Over the past year, the two companies worked to take the technology from material development to space flight and testing in orbit. This involved combining and formulating materials, manufacturing satellite parts, carrying out testing, and developing the expertise needed to prepare advanced materials for use in space.

 

FibreCoat, named last year as one of Fast Company’s Best Workplaces for Innovators, has developed a novel process for coating metals and plastics onto fibres during the fibre-spinning process. Lofith has combined FibreCoat’s coated fibres with its thermoplastic composite technology to create lightweight structural materials designed for highly demanding environments. Lofith’s composite technology can deliver up to 50% weight reduction and 30% greater strength compared with aluminium, while also being recyclable.

 

The material was carried on a CubeSat launched as part of the Transporter mission. Once in orbit, the satellite allows the companies to gather real-world information about how the material responds to conditions in space. The mission therefore moves the technology beyond laboratory and ground testing and provides evidence of how it performs in the environment for which it is ultimately intended.

 

Dr Robert Brüll, founder and CEO of FibreCoat, said:

 

‘This is one of the biggest moments in FibreCoat’s history.

 

‘Taking a material from an idea in the lab to hardware flying in orbit is a significant step, and one we have been working towards for years. It shows how far both the technology and the company have come.

 

‘Space is critical infrastructure, but the next chapter in its story depends on advanced materials.

 

‘This mission gives us the opportunity to prove our technology performs in space, to generate the flight data customers need, and ultimately to show that FibreCoat materials will play a part in the creation of the next generation of space systems.

 

‘I’m proud of the team for the hard work they’ve put into this, and grateful to our friends at Lofith for partnering with us.’

 

FibreCoat is widely known for innovation. Its radar-absorbing ‘stealth’ material, developed last year, was named one of the Best Inventions of 2025 by TIME magazine. Its materials have widespread applications – not just for space, but for defence, the automotive sector, and construction, among others. The orbital mission represents another important step in turning those materials technologies into products for some of the world’s most demanding industries.

 

Following launch, the CubeSat must reach its correct orbit before monitoring can begin. The companies expect to start receiving useful information around one month after launch and will then monitor the material regularly during the mission.

 

The project is also designed to demonstrate the commercial potential of advanced European materials for space. Lofith is already receiving enquiries from customers interested in the material, and the companies hope the mission will generate further interest from businesses looking for lightweight, high-performance materials. Successful orbital testing would give prospective customers something particularly valuable: performance data from space itself.

 

The collaboration brings together two European materials companies with complementary technologies. FibreCoat provides its coated-fibre technology; Lofith provides expertise in thermoplastic tapes and composite manufacturing.

 

Together, the companies aim to develop stronger, lighter and more sustainable materials for satellites and other demanding applications.

 

ENDS

 

About FibreCoat:

 

Founded in Germany in 2020, FibreCoat is changing materials technology. Its products, developed through a novel fibre-coating process, combine the strength and flexibility of coated fibres with unmatched cost efficiency. FibreCoat’s materials are lightweight, strong, conductive, and recyclable. These qualities make them crucial in defense, space, automotive, and construction.

 

FibreCoat solves major sector challenges. Satellites face radiation, extreme temperatures, and E.M.I. but must remain efficient at minimal cost. Defense equipment needs to be durable and effective in conflict zones. Electric vehicles must stay light while managing their heat and protecting drivers from E.M.I., while the construction industry requires specialist materials for building insulation and E.M.I. shielding.

 

FibreCoat’s production process also uses around 90% less energy than traditional methods, bringing down costs dramatically. And with modular production lines that can be set up anywhere in the world within two weeks, FibreCoat helps to ensure the resilience of supply chains in an increasingly volatile world.

 

Find out more: https://fibrecoat.de/

 

Media contacts:

Victoria Pearson
Sonder London
team-fibrecoat@sonder-london.com
+44 2080584781